Here you can find the powertrain specifications for the Volvo FH range.

  • Engines
  • I-Shift
  • I-Shift software packages
  • I-Shift Dual Clutch
  • Rear axles
  • Rear axle ratios
  • Powertrain combinations
  • Power take-offs

Engines

  D13K  D16K 
Emmission standard  Euro 6  Euro 6
No. of cylinders  6
Displacement  12.8 dm³  16.1 dm³ 
Stroke  158 mm  165 mm 
Bore  131 mm  144 mm
Compression ratio  17.0:1  16.0:1
Economy revs  900–1400 r/min  950–1400 r/min
Exhaust braking power 200 kW (2300 r/min) 230 kW (2200 r/min)
VEB+ effect  375 kW (2300 r/min) 470 kW (2200 r/min)
VEB+  option option 
Oil filters  2 full-flow, 1 bypass   2 full-flow, 1 bypass 
Oil change volume, incl. filter  33 l  42 l 
Cooling system, total volume  38 l  48 l 

Fuel prerequisites

Sulphur free fuel (EN590, max 10 ppm sulphur)
Bio-diesel generation 2 (EN15940, syntetic diesel)

 

Oil change interval

Up to 100,000 km or once a year with VDS4. 

Engine-mounted power take-off

  Torque output  Ratio 
EPTT650  650 Nm*  1.26:1
EPTT1000  1000 Nm*  1.26:1
* Torque output both when driving and standing still.
D13K – Power/torque

D13K – Power/torque

Net output according to EC 582/2011

D13K420 (309 kW)   
Max power at 1400–1800 r/min  420 hp 
Max torque at 860–1400 r/min  2100 Nm 
D13K460 (338 kW)   
Max power at 1400–1800 r/min  460 hp 
Max torque at 900–1400 r/min  2300 Nm  
D13K500 (368 kW)   
Max power at 1400–1800 r/min  500 hp 
Max torque at 1000–1400 r/min  2500 Nm 
D13K540 (397 kW)   
Max power at 1450–1800 r/min  540 hp 
Max torque at 1000–1450 r/min  2600 Nm 
D16K – Power/torque

D16K – Power/torque

Net output according to: EC 582/2011

D16K550 (405 kW)   
Max power at 1350–1900 r/min  550 hp 
Max torque at 900–1350 r/min  2800 Nm*
D16K550 (405 kW)   
Max power at 1350–1900 r/min  550 hp 
Max torque at 900–1350 r/min  2900 Nm 
D16K650 (479 kW)   
Max power at 1450–1900 r/min  650 hp 
Max torque at 950–1450 r/min  3150 Nm 
D16K750 (552 kW)   
Max power at 1600–1800 r/min  750 hp 
Max torque at 950–1400 r/min  3550 Nm 
* Only available for 550 hp motor with manual gearbox
I-shift

12-speed splitter and range gearbox with an automated gear changing system. I-Shift can be fitted with a compact retarder, power take-off, emergency power steering pump and oil cooler.

Specifications

Type Top gear Engine torque (Nm) GCW approval (tonnes)
AT2412F
Direct  2400 44
AT2612F
Direct  2600 100
ATO2612F
Overdrive  2600 100
AT2812F
Direct  2800 60
ATO3112F
Overdrive  3150 100
ATO3512F Overdrive 3550 100

I-Shift Dual Clutch specifications

Type  Top gear  Engine torque (Nm) GCW approval (tonnes)
SPO2812 Overdrive 2800 80

I-Shift software packages

Basic version (TP-BAS)
TP-BAS is the standard software package supplied with the I-Shift and includes the gearbox’s basic functions for allround driving.

I-Shift distribution gear changing software (TP-DIST)
TP-DIST adapts the gearbox’s function to the specific conditions in the distribution segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed.

I-Shift construction gear changing software (TP-CON)
TP-CON adapts the gearbox’s function to the specific conditions in the construction segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed. This software can also handle tougher road conditions.

I-Shift long haul gear changing software (TP-LONG)
TP-LONG includes intelligent functions that minimise fuel consumption. This software package is ideal for long-haul operations where strong emphasis is placed on fuel economy. This package includes the I-Roll function.

Heavy duty transport (TP-HD)
TP-HD optimises I-Shift for heavy duty transport with high gross combination weights (>85 tonnes). Regardless of the gross combination weight, the driver can always optimise drivability by selecting or deactivating the heavy duty mode, and activating the long haul mode. The functions in the software package also offer benefits for trucks hauling multiple trailers.

I-Shift software packages

Sales variants TP-BAS TP-DIST TP-CON TP-LONG TP-HD**
Basic PTO Functions (APF-BAS)
Enhanced PTO Functions (APF-ENH) o o o o o
Basic Gear Selection Adjustment (AMSO-BAS)
Enhanced Gear Selection Adjustment, incl. Kickdown (AMSO-AUT) o o o
Basic Vocational Functions (AVO-BAS)
Enhanced Performance – Bad Roads (AVO-ENH) o o o
Basic Shift Strategy
Performance Shift
Gearbox Oil Temperature Monitor
Heavy Start Engagement
I-Roll (•)
Smart Cruise Control (•)
Launch Control
Enhanced Shift Strategy (GCW ≤ 85 t)
Heavy Duty GCW Control (85 t < GCW ≤ 180 t)
Ultra low crawler gear* (ASO-ULC) o o o
Crawler gear* (ASO-C) o o o
Reverse multi-speed* (ARSO-MSR) o o o
I-See, use of GPS data o o

• Standard (•) The function can be used when TP-LONG is activated. o Option – Not available
*Only AT2612F, ATO2612F, ATO3112F and ATO3512F. ARSO-MSR requires ASO-ULC or ASO-C.
**Only AT2612D, AT2612F, ATO2612F, ATO3112F and ATO3512F.

Rear axles

Type  Axle Gear Max torque (Nm) Max axle/bogie load (tonnes) GCW approval (tonnes)
Single reduction          
RSS1344C/D Solo Hypoid 2600 13 44
RSS1356 Solo Hypoid 2400/2800 13 56/44
RSS1360 Solo Hypoid 3550 13 70
RTS2370A Tandem Hypoid 3550 23 80
RSS1144 Solo Hypoid 2800 11.7 44
Hub reduction          
RSH1370F Solo Conical spiral cut 3550 13 70
RTH2610F Tandem Conical spiral cut 3550 26 100
RTH3210F Tandem Conical spiral cut 3550 32 100
RTH3312 Tandem Conical spiral cut 3550 33 120

Rear axle ratios

RSS1344C/D RSS1356 RSS1360 RSS1144 RTS2370A RSH1370F RTH2610F RTH3210F RTH3312
2.31:1* 2.50:1 2.47:1 2.31:1 2.43:1 3.46:1 3.33:1 3.33:1 3.61:1
2.47:1* 2.79:1 2.64:1 2.47:1 2.57:1 3.61:1 3.46:1 3.46:1 3.76:1
2.64:1 3.10:1 2.85:1 2.64:1 2.83:1 3.76:1 3.61:1 3.61:1 4.12:1
2.85:1 3.44:1 3.08:1 2.85:1 3.09:1 4.12:1 3.76:1 3.76:1 4.55:1
3.08:1 3.67:1 3.40:1 3.08:1 3.40:1 4.55:1 3.97:1 3.97:1 5.41:1
3.36:1   3.67:1   3.78:1 5.41:1 4.12:1 4.12:1 6.18:1
3.70:1   4.11:1   4.13:1   4.55:1 4.55:1 7.21:1
        4.50:1   5.41:1 5.41:1  
        5.14:1   6.18:1 6.18:1  
        5.67:1     7.21:1  
        6.17:1        

* For RSS1344D

Powertrain combinations

  D13K420 D13K460 D13K500 D13K540 D16K550 * D16K550 ** D16K650 D16K750
I-Shift                
AT2412F            
AT2612F        
ATO2612F        
AT2812F              
ATO3112F            
ATO3512F              
                 
I-Shift Dual Clutch                 
SP02812     ●  ●  ●        
Single reduction axles                
RSS1344C/D        
RSS1356      
RSS1360
RTS2370A
RSS1144        
Hub reduction axles                
RSH1370F
RTH2610F
RTH3210F
RTH3312

* (2800 Nm)
** (2900 Nm)

Power take-offs

A wide range of clutch-independent and clutch-dependent power take-offs are available - to drive all sorts of body equipment.

Clutch-independent power take-offs

PTER-DIN: Rear-mounted engine power take-off for direct drive of a hydraulic pump.
PTER1400: Rear-mounted engine power take-off with flange connection for hydraulic pump.
PTER-100: Rear-mounted engine power take-off with flange connection for hydraulic pump.

Clutch-dependent power take-offs

PTR-F: Connecting flange attachment and low-rev or high-rev.
PTR-FL/FH: Connecting flange attachment and low-rev or high-rev.
PTR-D/PTR-DM/PTR-DH: Low/medium/high-rev with DIN-connection for direct attachment of a hydraulic pump.
PTRD-F: High-rev with connecting flange attachment for direct-fitted propshaft.
PTRD-D: High-rev with dual drive. DIN connection front and rear for direct attachment of hydraulic pumps.
PTRD-D1: High-rev with dual drive. Connecting flange attachment at the rear and DIN attachment at the front.
PTRD-D2: High-rev with dual drive rear and single drive front. Two connecting flange attachments rear and one DIN attachment at the front.

Download

Driveline specifications

Download the complete driveline specifications as a PDF. Download(PDF, 2.3 MB)
Find your local dealer

Get closer to the Volvo FH

Spec your perfect truck. It all happens with your local Volvo Trucks dealer.

Find your local dealer